18
2022-05
1. As refractory materials: Graphite and its products have high-temperature and high-strength properties, mainly used in the metallurgical industry to manufacture graphite crucibles. In steelmaking, graphite is often used as a protective agent for steel ingots and as the lining of metallurgical furnaces. 2. As conductive materials: In the electrical industry, it is used to manufacture electrodes, brushes, carbon rods, carbon tubes, positive electrodes for mercury rectifiers, graphite gaskets, telephone parts, and coatings for television cathode ray tubes, etc. 3. As wear-resistant lubricating materials: Graphite is commonly used as a lubricant in the mechanical industry. Lubricating oils often cannot be used under high-speed, high-temperature, and high-pressure conditions, while graphite wear-resistant materials can operate without lubricating oil at temperatures ranging from 200 to 2000 °C and at very high sliding speeds. Many devices that transport corrosive media widely use graphite materials to make piston cups, sealing rings, and bearings, which do not require the addition of lubricating oil during operation. Graphite slurry is also a good lubricant in many metal processing operations (drawing, pipe pulling). 4. Graphite has good chemical stability. Specially processed graphite has characteristics such as corrosion resistance, good thermal conductivity, and low permeability, making it widely used in the production of heat exchangers, reaction tanks, condensers, combustion towers, absorption towers, coolers, heaters, filters, and pump equipment. It is widely applied in industries such as petrochemicals, hydrometallurgy, acid-base production, synthetic fibers, and papermaking, saving a large amount of metal materials. 5. As casting, sand casting, pressing, and high-temperature metallurgical materials: Due to the small thermal expansion coefficient of graphite and its ability to withstand rapid cooling and heating changes, it can be used as a casting mold for glassware. Using graphite allows black metals to achieve precise casting dimensions and high surface finish rates, which can be used without processing or with minimal processing, thus saving a large amount of metal. In the production of hard alloys and other powder metallurgy processes, graphite materials are typically used to make molds and porcelain boats for sintering. The crystal growth crucibles for single crystal silicon, regional refining containers, support fixtures, and induction heaters are all made from high-purity graphite. Additionally, graphite can also be used for graphite insulation boards and bases for vacuum smelting, high-temperature resistance furnace tubes, rods, plates, and grid components. 6. Used in the atomic energy industry and national defense industry: Graphite has good neutron moderation properties and is used in atomic reactors. The uranium-graphite reactor is currently one of the most commonly used types of atomic reactors. The moderator materials in power atomic energy reactors should have high melting points, stability, and corrosion resistance, which graphite can fully meet. The purity requirements for graphite used in atomic reactors are very high, with impurity content not exceeding several tens of PPM. In particular, the boron content should be less than 0.5 PPM. In the national defense industry, graphite is also used to manufacture nozzles for solid fuel rockets, missile nose cones, parts for space navigation equipment, insulation materials, and radiation protection materials. 7. Graphite can also prevent boiler scaling. Relevant units have tested that adding a certain amount of graphite powder (about 4-5 grams per ton of water) to water can prevent scaling on the boiler surface. In addition, graphite coatings on bridges and pipelines can prevent corrosion and rust. 8. Graphite can be used for pencil leads, pigments, and polishing agents. After special processing, graphite can be made into various special materials for relevant industrial sectors. 9. Electrodes: How graphite can replace copper as an electrode.
2022-05-18
30
2019-10
This conference is jointly hosted by the People's Government of Xi'an and the Graphene Industrial Skills Innovation Strategic Alliance, with the Xi'an Science and Technology Bureau, the Management Committee of Xi'an High-tech Industrial Development Zone, and the Xi'an Silk Road Graphene Innovation Center as the organizers. Leaders attending the conference include Xu Dingming, former counselor of the State Council and former director of the Energy Bureau; Xing Tao, former deputy director of the Raw Materials Department of the Ministry of Industry and Information Technology; Shi Gaoling, member of the Shaanxi Provincial Science and Technology Work Committee and deputy director of the Science and Technology Department; Wang Huanchang from the Xi'an Political Consultative Conference and Xi'an Federation of Industry and Commerce; Wang Jianhua, executive vice president/secretary-general of the China Industry-University-Research Cooperation Promotion Association; Li Zhijun, secretary of the Party Leadership Group and director of the Xi'an Science and Technology Bureau; and Gu Haiwen, deputy director of the Xi'an High-tech Zone Management Committee. At the opening ceremony, graphene Nobel Prize winner Professor Andre Geim from the University of Manchester, Professor Costas Galiotis from FORTH in Greece, Professor Duan Xiangfeng from the University of California, Los Angeles, Chairman Qu Yan of Changzhou Sixth Element Materials Technology Co., Ltd., Vice President Murni Ali from Nano Malaysia, and Mr. Wang Zhenyu, assistant general manager of China United Property Insurance Company, successively delivered keynote speeches, deeply analyzing cutting-edge graphene technology and exploring the future development of graphene. It is reported that the "International Graphene Product Certification Center (IGCC)" is a global independent third-party certification organization proposed by the European graphene network organization Phantoms Foundation and other related organizations. This certification center was officially established on January 18, 2018, headquartered in Germany, and is currently an independent third-party organization providing voluntary certification services for graphene raw materials and application products in the global graphene industry. The establishment of the IGCC Xi'an Center not only provides strategic support for domestic graphene certification but also greatly stimulates the enthusiasm for the development of the domestic graphene industry. It is also an important measure in response to the Belt and Road Initiative, marking a milestone in the healthy standard development of graphene. This conference features a roundtable meeting on global cooperation in graphene along the Belt and Road, an exhibition of Shaanxi's graphene innovation achievements and the effects of the Belt and Road, a business reception room for enterprises to connect with graphene technology and product needs, a graphene product experience hall that combines popular science and market promotion, a new product launch conference for enterprises to release graphene products globally, and a global graphene industry research report release ceremony, among other special activities. These various activities aim to promote the development of the graphene industry. Among them, this conference has specially established the "Shaanxi Graphene Industrial Innovation Achievements and Belt and Road Effects Exhibition" with the theme of enhancing the central axis of the Belt and Road to boost the future of Shaanxi's graphene industry. The "Effects Exhibition" will showcase the innovative achievements of Shaanxi's innovation teams and research institutions, as well as mature products from Shaanxi's graphene industrialization, demonstrating the new vitality and advantages of Shaanxi's "hard technology" industrial development to the world. Since the Xi'an Silk Road Graphene Innovation Center was established in the high-tech zone, it has implemented the "Five Ones" project for graphene innovation in Xi'an, successively establishing the "Secretariat of the China International Graphene Innovation Conference," forming the "Xi'an Graphene Industrial Development Expert Committee," establishing the "Xi'an Graphene Industrial Alliance," building the "Graphene Industrial Innovation Base," and proposing the "Xi'an Silk Road Graphene Industrial Investment Fund." Focusing on key industry applications, the center has established professional and authoritative industrial service platforms, including research institutes for medical, construction, energy conservation and environmental protection, automotive, military integration, textiles, as well as promotion centers for agricultural and electric heating applications. Through these professional industrial service platforms, the center has effectively promoted the continuous emergence and transformation of Shaanxi's graphene innovation achievements, with a large number of high-end talents and their innovative achievements represented by graphene Nobel Prize winner Professor Andre Geim developing in Xi'an. At the same time, the center has also helped enterprises open up market promotion channels, assisting in the industrial transformation of Xi'an. This conference has specially established 100 "business reception rooms," gathering many domestic and foreign Fortune 500 companies such as Huawei, Haier, Shaanxi Automobile, Oriental Yuhong, and Tata Steel. Focusing on fields such as the Internet of Things, new energy, coatings, thermal management, medical health, aerospace, and energy conservation and environmental protection, it connects over 200 graphene technology innovation needs with global graphene industrialization enterprises, bringing urgently needed graphene-related technologies and products to application enterprises, helping them gain strategic advantages, promote industrial transformation and upgrading, and achieve new industrial growth points. It will also help graphene enterprises expand their product markets, gauge their future development directions, promote the industrialization process of graphene, and open a new era of global graphene industrial development. Everyone participates to build a highland of Silk Road graphene industrial innovation. 2019 is a key year for upgrading the Xi'an hard technology brand. The successful holding of the "2019 China International Graphene Innovation Conference," as an important part of the hard technology conference, helps Xi'an build an innovative ecological chain for the graphene new material industry, promotes international scientific and technological communication and cooperation in Xi'an, and stimulates the innovative vitality of local new material and other hard technology enterprises. At the same time, leveraging the conference platform, it aims to build a technological cooperation channel between Xi'an and the countries along the Belt and Road through graphene new materials, creating a global graphene industrial development community of complementary advantages and win-win cooperation, assisting Xi'an in becoming a city of graphene industrial application innovation along the Belt and Road and a global capital of hard technology, effectively supporting and leading high-quality economic development, and achieving the goal of catching up and surpassing.
2019-10-30
19
2022-10
29
2020-06
1. Basic Information of the Project Legal Entity The company plans to invest 760 million yuan starting from 2018 to build production lines for expandable graphite, graphite paper, spherical graphite, anode materials, and graphite mining in the Didao District. This deep processing project of graphite is listed as one of the "Top 100 Projects" in 2020. 2. Construction Location The project is located in the Didao District of Jixi City, Heilongjiang Province. The deep processing plants for expandable graphite, graphite paper, spherical graphite, and anode materials are located at 0-107 Didao Mine, Didao District, Jixi City, while the graphite mining plant is located at Datonggou, Didao District, Jixi City, Heilongjiang Province. 3. Construction Duration The construction period of the project is from 2018 to the end of 2021. 4. Investment Scale The total planned investment for the project is 760 million yuan. 5. Construction Scale and Content The construction of the project will be undertaken by its subsidiaries, as follows: 1. Jixi Harbin Institute of Technology Carbon-Based Material Technology Co., Ltd. will undertake the production line with a capacity of 12,000 tons/year of expandable graphite and 600 tons/year of graphite paper. 2. Jixi Harbin Institute of Technology New Energy Material Co., Ltd. will undertake the production line with an annual output of 20,000 tons of high-purity spherical graphite. 3. Jixi Harbin Institute of Technology Natural Graphite Anode Material Co., Ltd. will undertake the production line with an annual output of 20,000 tons of natural graphite anode materials. 4. Jixi Harbin Institute of Technology High-Carbon Graphite Material Co., Ltd. will undertake the graphite mining and processing plant with an annual processing capacity of 600,000 tons of ore and production of 50,000 tons of graphite fine powder. 6. Expected Economic and Social Benefits Once the project is fully completed, it will create 409 new jobs, achieve annual sales revenue of 1.143 billion yuan, and generate taxes and profits of 50.43132 million yuan, with a total investment return rate of 52.05% and an investment tax return rate of 59.39%. 7. Project Progress and Existing Issues 1. The project is divided into four phases, with the following relevant approval procedures: (1) The production line with a capacity of 12,000 tons/year of expandable graphite and 600 tons/year of graphite paper. This project is based on the existing factory buildings, land, and equipment. Project filing number: 2018-230304-73-03-054651, environmental assessment approval number: Jihuan Shen [2019] No. 14, real estate certificate: Heilongjiang (2018) Jixi City Real Estate No. 0008819. (2) The annual production line of 20,000 tons of high-purity spherical graphite. Project filing number: 2019-230304-75-03-064090; environmental assessment approval number: Jihuan Shen [2019] No. 31; land approval document: Jixi City (County) [2019] Jizheng Tugan No. 9; land approval: Jihui Guizhi [2019] No. 044. (3) The annual production line of 20,000 tons of natural graphite anode materials. Project filing number: 2020-230304-30-03-086081; environmental assessment approval number: Jihuan Shen [2019] No. 31; land approval document: Jixi City (County) [2019] Jizheng Tugan No. 9; land approval: Jihui Guizhi [2019] No. 044. (4) The graphite mining and processing plant with an annual processing capacity of 600,000 tons of ore and production of 50,000 tons of graphite fine powder. Project filing number: 2019-230304-30-03-064087. 2. For projects that have already started construction, it is necessary to clarify the investment completion status and project progress. (1) The production line with a capacity of 12,000 tons/year of expandable graphite and 600 tons/year of graphite paper. This project has invested 77 million yuan in the technical transformation of the existing Didao old factory, started construction in September 2018, completed construction tasks on March 15, 2019, and began trial production. By the end of August 2019, it achieved sales revenue of 20 million yuan. (2) The annual production line of 20,000 tons of high-purity spherical graphite. The expected investment amount is 230 million yuan. This project started construction in June 2019, and the main civil engineering for the spherical workshop, boiler room, auxiliary workshop, and finished product warehouse has been completed, with an investment of 130 million yuan already completed. By early 2020, the debugging of six spherical graphite production lines had been completed. The project started construction in March 2020 and is currently actively carrying out the construction of the purification workshop and other auxiliary facilities, as well as equipment installation and debugging, with trial production expected in May 2020. (3) The annual production line of 20,000 tons of natural graphite anode materials. The expected investment amount is 230 million yuan. This project has completed project filing, environmental assessment, detailed planning, land supply, and other approval procedures, and construction started in mid-April 2020, with completion expected by the end of October 2020. (4) The graphite mining and processing plant with an annual processing capacity of 600,000 tons of ore and production of 50,000 tons of graphite fine powder. The planned investment for this project is 220 million yuan, and it is currently in the preparatory stage. The project started construction in mid-October 2019, with completion planned for the end of October 2020. As of the end of November 2019, an investment of 5.45 million yuan has been completed for site leveling, office renovation, equipment ordering, and other preliminary work. Construction is planned to resume on April 11, 2020. A favorable business environment and honest service yield fruitful results The new generation of large-size carbon crystal material project settles in Jixi Zhang Changrong and Yu Hongtao attended the project signing Jixi Daily 2020-04-08 07:47 City leaders Zhang Changrong, Yu Hongtao, Yang Guoli, Gao Qimin, and Qin Jiaozhong, chairman of Heilongjiang Harbin Institute of Technology Graphite Technology Co., Ltd., and Wang Hongbo, executive president of Harbin Institute of Technology Robot Group Co., Ltd., attended the signing ceremony. Zhang Changrong, Yu Hongtao, Yang Guoli, Qin Jiaozhong, and others witnessed the project signing together. Relevant responsible persons from the investment side introduced the project.
2020-06-29
29
2020-06
Jixi Harbin Institute of Technology New Energy Materials Co., Ltd.
Annual production of 20,000 tons of high-purity spherical graphite production line project Jixi Harbin Engineering New Energy Materials Co., Ltd. was established in November 2018, with a registered capital of 100 million yuan, formed by Heilongjiang Harbin Graphite Technology Co., Ltd. and Jixi Betterray Graphite Industrial Park Co., Ltd. The company is located at 0-107 Hongqi Committee, Didao District, Jixi City. The main business operations of the company include: promotion services for new material technology; research and development, production, processing, and sales of new energy power battery anode materials. The construction period of this project is 1 year, and the project name is: Annual production of 20,000 tons of high-purity spherical graphite production line project. The total planned investment for this project is 230 million yuan, and nearly 100 million yuan has been invested so far. The project commenced construction in June 2019, and the main civil engineering for four workshops: spherical workshop, boiler room, auxiliary workshop, and finished product warehouse has been completed. By January 2020, the debugging of six spherical graphite production lines was completed. The project resumed production in March 2020, and construction of the purification workshop and other auxiliary facilities is currently actively underway.
2020-06-29
Phone/WeChat:
E-mail:
